Author Topic: G&G CM16 R8-L Accuracy Issue  (Read 744 times) Share

0 Members and 1 Guest are viewing this topic.

Offline Cass

  • Raw Recruit
  • *
  • Posts: 3
  • Pingu's Number One Fan
    • View Profile
G&G CM16 R8-L Accuracy Issue
« on: July 01, 2016, 09:47:08 am »
Whenever I shoot towards anything at a range of greater than 10 meters or so, my shots seem to go left and right in a semi-circle pattern :C I've played with the hop up and that doesn't change it. The internals on it are entirely stock, though I did have to have the spring cut down to reduce the FPS. Anyone have any ideas on what I should try? <3
NOOT NOOT

Offline Shimmey

  • DV Member
  • *
  • Posts: 115
    • View Profile
Re: G&G CM16 R8-L Accuracy Issue
« Reply #1 on: July 01, 2016, 04:28:11 pm »
Simplest thing is to clean the barrel, seems obvious but a bit of shit in the inner barrel can do all sorts.

other than that, check the inner barrel / hop alignment. Probably worth removing the barrel and hop unit, disassemble and put back together. Check the hop rubber while you at it

Offline Cass

  • Raw Recruit
  • *
  • Posts: 3
  • Pingu's Number One Fan
    • View Profile
Re: G&G CM16 R8-L Accuracy Issue
« Reply #2 on: July 20, 2016, 08:42:29 pm »
I finally got around to dissembling the gun and found that the hop rubber was slightly bent and scrunched up. Straightened it out and all's good now :) Thank you for the advice
NOOT NOOT