Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - ThorMaNN

Pages: [1] 2
The Gearbox / G3 SG1 Misfire on Semi
« on: June 21, 2015, 12:10:56 pm »
Hi guys last game I came to DV (13th April last year!!) my G3 stopped firing. It did have its spring clipped on the day but fired for a few hours after that.

Well yesterday I was sorting through some stuff in the attic and decided to try and figure out what had happened. (I have never stripped a AEG before that's why it was so long).

While taking the gearbox apart the gun fired so it had jammed. I checked all gears were moving and reassembled the gearbox and tested - It jammed straight away. So i stripped the gearbox again (it let of the round) and i took the gears out and checked the teeth and all looked ok so i put it back together and tested.

It now fires fine on FA and at the time of testing it was firing every other round on Semi. today i grabbed my camera to upload a video of the misfire and its now working better on semi but still there are rounds it doesn't fire but the nozzle is moving so would be loading multi bb's into the chamber

Here is the video

Any ideas?

What a Great day
Thanks to all the marshals and players (especially the 2 blues who I team killed :oops: again sorry about that )
and a big thanks to Cougar for helping me get my Sniper to 480fps :)

I had a great day and I have just got home

Games and Gaming / Firefly Online!!
« on: July 18, 2013, 01:40:42 pm »
On Mobile at first they say but I hope it comes to PC :)

Firefly Online Game Announcement at SDCC 2013

General Discussion / New PC Repair Guy
« on: July 16, 2013, 10:21:21 pm »

Whats your Problem??

Ahh just press this and

Wiggle this

Oh um that shouldn't have happened

Let me just run some files


and then that should be nearly done

FFS Mummy No!

I said NO!!

FFS Parents!!

Right just one last click

Put his away

Put the side back

That will be £200 thank you

The Gearbox / Gun maintenance
« on: July 16, 2013, 11:38:47 am »
Hi guys what sort of grease, sprays and other gun caring stuff do you recommend for Gun Maintenance for AEG and a springer.

Also what gas is everyone using for their pistols.

Thanks in advance

Dragon Valley / Mandatory Game Discussion thread: May 26th 2013
« on: May 27, 2013, 06:50:07 pm »
Awesome day again, thank to everyone.

I am currently repairing myself (Welshy i guess it was worse than I thought!).

Starting to learn some names now and was nice to see welshy again

this is how he looked when i saw him last

Dragon Valley / 26th
« on: May 25, 2013, 03:05:36 pm »
Booking closed?

was not sure if i was going to be renting or not hence why i left it so late :(

General Discussion / Help, Any idea's
« on: May 18, 2013, 12:04:49 pm »

I have cleared the cache, as soon as i log in the forum sections vanish!

The Gearbox / Clipping help
« on: April 23, 2013, 10:29:42 pm »
Hi guys/girls

I'm coming this Sunday and I'm doin gthe gun rental but I MIGHT have my APS in a working order, however as said before i'm sure its at 515, so i need to drop it below 500 but would like to keep it close to 480/490 if i can any idea on how much i should take off?.

If i can get the APS working I can use it as a secondary

Also if i bring it to DV and its still hot will i get a chance to re-clip it and chrono again? (I don't mean over and over and over again).

General Discussion / Pew Pew :)
« on: April 16, 2013, 10:54:58 am »

The Gearbox / Some help and advise please
« on: April 14, 2013, 12:56:15 am »
Ok my APS is currently HOT @ 515 so need to clip the spring. That is not my only problem.

A while ago the cocking handle came off in my hand! the long metal pin had snapped off the cylinder which means I need a new cylinder. Trying to get parts for the APS is turning out to be quite hard now as they are no longer made.

My question is this, should i just buy a new sniper in 3 months when I'm UKARA registered or are there parts from new snipers that will fit the APS as i have seen some parts for the APS listed as fitting in new snipers.

I have also seen a ASG Steyr SSG 69 P2 Sniper rifle which looks the same as a APS but it has 2 RIS rails, however i can't find parts for this gun.

Then there is the age old question of IF i went for a new sniper what would you guys recommend?

General Discussion / Quick Question
« on: April 08, 2013, 10:37:11 am »
Going to be returning to Airsoft and i have a question.

I'm not UKARA registered but it turns out I need parts for my guns, Will I be able to post in the wants page on this forum?

I did find this post from a few years ago saying buying parts was ok but its a few years old and I wanted to double check.,1858.msg23171.html#msg23171

General Discussion / The big question
« on: October 30, 2008, 11:21:33 am »
I tried to post this last week but ie died

Asked my gf to marry me last week and she said yes :)

Dragon Valley / Ok old but been thinking
« on: September 18, 2008, 04:31:12 pm »
years ago at dv i used to have a black tac vest

Pictured wearing it at old boys village

last time i had it was at dv on 28th may

Did anyone find it in the safe house? as I know i didn;t load it into the car, I didnt wear it on the day as to be honest i dont like to wear to much so i can feel hits (why i play in a t-shirt or thin top)

you maybe asking why the hell ask about this after so long, I didnt realise it was gone untill it came to me moving home and it wasnt hanging where i put it,  to be honest i have written it off as gone but you never know, I want to get some good kit sorted for playing games and that tac vest was a snug fit and had pouches for mp5 mags, which is the gun i hope to be getting soon. So finding it would save me some cash.

anyway was this ever found, not worried if not as it was over 2 years ago.


Dragon Valley / UKARA
« on: September 11, 2008, 04:34:29 pm »
Ok i went to TCI

If i goto 14th sept then miss november and go again in dec can i get reg with UKARA or does it need to be 3 months in a row?

Pages: [1] 2